Safety specification for use of rolling kneading machine
Auther：1375
Pubdate：2019-09-22 09:37:12
Rolling kneading machine operators must go through training, rolling kneading machine in the operation of sudden fault or other temporary problems, shall not be unauthorized disassembly, must be through the field guidance of professional personnel or professional staff to deal with, to ensure safety.
1. Feeding of rolling and kneading machine: start the vacuum pump and connect the suction tube to the suction when a certain negative pressure is reached.
2. Vacuum and maintain the vacuum degree by using vacuum pump.
3. Control the running time. The roller kneading machine has special time setting buttons, which can be set according to different needs. Get the most out of it. Time varies from seconds to hours.
4. We can set the rolling time by the rolling time on the barrel control panel. There will be a certain interval during the rolling and kneading machine production, which can be customized according to different needs. Convenient and simple. Intermittent time and working time are set separately, with independent time control button.
5. Turn the knob on the control panel to "run", turn the vacuum pump and inflation knob to "open", and the machine starts to operate in the setting mode.
6. To stop the work of the rolling and kneading machine after the work is finished, rotate the knob of the control panel to the stop position. If the working time is set, the machine will automatically stop running after the working time.
7. The tail of the work is the material cleaning, until the pressure balance between the inside and outside of the drum, the ancient drum will be material out, the material out, the equipment cleaning, using professional cleaning agent water cleaning. Finally, rinse with clean water.
